MKS MultiGas High-Speed Gas Sampling Cart
Step 2: Check The Filter Assembly.
1.
To remove the Filter Assembly, push in the handle of the filter holder and rotate counter
clockwise (CCW) to disengage the locking mechanism.
2.
Remove the filter assembly from the housing. Visually inspect the filter. If the filter is
discolored or missing, replace the filter element.
Replacing a filter element:
a.
Unscrew the Stainless screw end from the filter holder.
b.
Slide a new filter onto the filter holder.
c.
Replace the stainless steel end cap and tighten down to hold the filter in place
d.
Slide the filter holder back into the cart. Push the filter holder and turn clockwise (CW)
to engage the locking mechanism.
Installation and Use Manual 2011 APRIL 2 Rev. 1.5
19
