CHAPTER 3: USING UNIFLOW
®
2 PROGRAMMING FUNCTIONS
UNIFLOW
®
2 PULSED THERMODE CONTROL
990-228
3-9
LIST OF HARDWARE, Page 1
Press the
4
key to bring up the
AUTO
RECOGNIZED HARDWARE
screen. This screen
lists the system software-recognized hardware
complement.
See
Appendix B, Electrical and Data
Connections
for connection details.
< AUTO RECOGNIZED HARDWARE >
a. MANUAL HEAD IS CONNECTED
b. LINE FREQUENCY DETECTION IS : 60HZ
c. E TYPE THERMOCOUPLE IS CONNECTED
Page, Graph or Data
HARDWARE SETUP, Page 2
With Page 1 of the
HARDWARE SETUP
screen
displayed, press the (down) key to bring up
Page 2 of the
HARDWARE SETUP
screen
< HARDWARE SETUP, page 2 of 2 >
1. DISPLAY CONTRAST
: 50%
2. BUZZER LOUDNESS
: 30%
3. END OF CYCLE BUZZER
: ON
4. SET OUTPUT RELAYS
NUMBER Select,
Page, Graph or Data
DISPLAY CONTRAST, Page 2
<DISPLAY CONTRAST >
DISPLAY CONTRAST
: 50 %
Press the
1
key to bring up the
DISPLAY
CONTRAST
adjustment screen. With this
screen, you may adjust the contrast of the
display with the (left/right) cursor keys for
comfortable viewing.
0 10 20 30 40 50 60 70 80 90
Adjust ,
Page, Graph or Data
BUZZER LOUDNESS, Page 2
<BUZZER LOUDNESS >
BUZZER LOUDNESS
:
30 %
-------------------------------------------------------------------------
Press the
2
key to bring up the
BUZZER
LOUDNESS
adjustment screen. With this screen,
you may adjust the loudness of the end of cycle
buzzer so that it may be heard reliably against
background noise.
0 10 20 30 40 50 60 70 80 90
Adjust ,
Page, Graph or Data
END OF CYCLE BUZZER, Page 2
Press the
3
key to toggle between
OFF
and
ON
for the end of cycle buzzer. When you select the
ON
option, a buzzer will sound when the actual thermode temperature reaches the
Cool
temperature setting.
