Mitutoyo 542-071, User'S Manual / Instructions For Use

Page: 42 / 76

4 Basic Operations
28
No. 99MBC109B
4.5
Peak Mode Setting
The maximum value, the minimum value, and TIR value are constantly
calculated in the Counter. By switching the mode, you can display the counter
value according to the intended application.
Mode Description
Normal
measurement
Counts the movement (displacement) of the contact point of the
Linear Gage, and then displays the counter value successively.
Max. hold
measurement
Displays the maximum value (MAX) measured during the
measurement. The display will not change until a new maximum value
is measured.
Min. hold
measurement
Displays the minimum value (MIN) measured during the
measurement. The display will not change until a new minimum value
is measured.
TIR measurement Displays TIR value during the measurement = TIR (maximum value
- minimum value). The display will not change until either a new
maximum value or minimum value is measured.
4.5.1 Procedure for Switching Peak Mode
This section explains how to switch Peak mode.
1
Press and hold [SEL]. (For 1-axis models, proceed to step 2 .)
» The selected Display will blink.
Tips
Each time you press [SEL], the blinking switches between Display A and Display B.
"4.1 Switching Between Display A and B (2-Axis Models Only)" (page 25)
2
Repeatedly press [MODE] until the desired mode is displayed.
» The mode will switch as follows:
Normal
measurement
Maximum value
Hold measurement Minimum
value
Hold measurement
TIR
measurement
MAX MIN
TIR
MAX MIN
TIR
MAX MIN
TIR
MAX MIN
TIR
4.5.2 Procedure for Clearing the Peak Value
This section explains how to clear the peak value in Peak mode.
1 Press and hold [SEL]. (For 1-axis models, proceed to step 2 .)
» The selected Display will blink.