Mitsubishi V19-V21, Tehnical Manual

Page: 9 / 71

1-5
are still available even though a Set Top Box is not needed
to receive HD broadcasts. In the V19 these inputs are
mainly used to connect a Digital Broadcast Satellite
(DBS) to the TV.
The IR Emitter Repeater outputs are for connecting IR
Blasters to control AV devices that are not System 5 or
1394 compatible. Signals from other manufacturer’s
remotes are amplified in the TV and output from the
Repeater Jacks.
Digital Analog Inputs & Outputs are located on the
rear of the TV and are shown in Figure 1-4 . These
include:
• ANT-DTV … Antenna or Cable Input (ATSC
or QAM)
• Three 1394 Jacks … to connect external 1394
compatible devices
• Two System 5 IR Emitter Jacks … for IR
Blasters controlling external System 5 devices.
• Digital Audio Output … AC-3® digital output
for connection to an external device with an
AC-3® Decoder.
Display Formats
Figure 1-5 illustrates the Display Formats possible in
the V19. Pressing the “FORMAT” button on the Re-
mote Control changes the Display Format. Note that