Mitsubishi V19-V21, Tehnical Manual

Page: 13 / 71

2-1
Chapter 2
NetCommand
TM
The NetCommand
TM
feature in the V19 and V21 is an
enhanced user simplified Home Theater Control Sys-
tem. It provides graphic control of an entire Home The-
ater System through the TV. It controls existing analog
devices along with New Digital Home Theater devices.
NetCommand
TM
uses System 5 to control Home
Theater components with IR Blasters, and also con-
trols HAVi capable devices over 1394 cables.
When a TV is first installed, the Setup Wizard automati-
cally displays a series of Initial Setup Screens to config-
ure System 5. It allows entry of all devices connected
to the TV. When the Initial Setup is complete,
NetCommand
TM
is automatically activated. For specfic
instructions on setup and use, refer to the Owner's Guide
and NetCommand Guide.
Set the Remote to the TV Layer
NetCommand POWER 9-3-5
Standard POWER 0-0-0
Press and Hold Press in Sequence
Figure 2-12: Change Remote Operation Mode
IEEE-1394 Devices
The TV automatically detects when an IEEE-1394 de-
vice is connected. The user will be asked to select a
name for that device that will be displayed in the Device
menu.
Remote Operational Mode
Before the NetCommand TM feature can be use, the Re-
mote Hand Unit must be set to the NetCommand
TM
operational mode. To change to the NetCommand
TM
mode:
• Set the Remote to the TV Layer
• Point the Remote away from the TV
• While holding the "Power" button, press "9-3-
5" in sequence.
Figure 2-12 illustrates how to change to the
NetCommand TM mode, or to the Standard mode.