Mitsubishi V19-V21, Tehnical Manual

Page: 68 / 71

10-4
Note that Green Horizontal is added to Red and Blue
Horizontal second stage inputs, and Green Vertical
is added to the Red and Blue Vertical second stage
inputs.
The Green Correction voltage is used to correct green
raster distortion, but does effect the red and blue raster.
Therefore, green raster distortion must be adjusted first,
before adjusting red and blue convergence.
Convergence Output Circuitry
Figure 10-3 illustrates the Convergence Ouput circuitry.
In the V19, Convergence Output Circuitry is internal to
a single IC, IC8C01, located on the PCB-POWER
. It
functions the same as in previous Output circuitry ex-
cept only one IC is needed.