Chapter 3 Use of Operation Panel
TDP-324
-47-
3.3.12 Set up a print Interval
Printing is interrupted at the number that you input in this mode for cleaning a
thermal
head.
•
The counter is reset automatically after you power down a machine even if print
jobs don’t reach the number that you input.
•
When print jobs reach the number that you input, “Restart” is displayed on the LCD.
Then you need to press a enter button to reset the counter.
1.
In the ready state, press the
menu
button
once, press the
+
button until ”Interval Set”
displays on the LCD.
2.
Press the
enter
button to display a setting
state of “Interval Set”.
・
default setting is 0 (disable this mode)
3.
Press the
enter
button after input Interval
setting.
[Useful tip]
It can be set from 10 times to 500 times in increments of 10 times.
To change values, use the following buttons:
menu
button: Increment the number by 100,
+
button: Increment the number by 10
loading
button: Decrement the number by 100,
-
button: Decrement the number by 10
4.
Press the
clear
button repeatedly until the
ready state is displayed.
Interval 0
Interval Set
Interval 50
Summary of Contents for TDP-324
