Mitsubishi TDP-324, User Manual

Page: 52 / 84

Chapter 3 Use of Operation Panel
TDP-324
-46-
3.3.11 Display of accumulated print distance
Displays accumulated print distance.
This message is displayed only when Manage Count Sw is set at ON (factory setting).
1.
In the ready state, press the menu button
once, press the + button until ”Manage Count”
displays on the LCD.
2.
Press the enter button to display “Manage
Count”(accumulated print distance).
・
In case of Millimeter mode, accumulated print
distance is shown in meter.
・
In case of Inch mode, accumulated print distance
is shown in feet. (unit is omitted)
3.
Press the clear button repeatedly until the
ready state is displayed.
Count
□□□
m
Manage Count