Mitsubishi TDP-324, User Manual

Page: 40 / 84

Chapter 3 Use of Operation Panel
TDP-324
-34-
Setup of the cleaning length (Normal mode)
T
he length of the black bar printed at the time of head cleaning(Normal mode) execution is changed
as follows.
1.
In the ready state, press the menu button
once, press the + button until ”Head Cleaning”
displays on the LCD.
2.
Press the enter button once, press the +
button once, and display ”Cleaning Length” on
the LCD.
3.
Press the enter button, and display the setting
state of cleaning length.
4.
Press the + or - button to change the setting of
the cleaning length.
【 【 【 【
Useful tip
】 】 】 】
It can be set from 10mm to 50mm, in increments of 1mm .
When the setting value is enlarged, the effect of head cleaning becomes large,
but cleaning time becomes long.
5.
Press the enter button to confirm the setting of
the special length.
6.
Press the clear button repeatedly until the
ready state is displayed.
Head Cleaning
Cleaning Len 10
Cleaning Len 50
Cleaning Length
Cleaning Len 50