A-3
[Wiring Precautions]
CAUTION
z
Be sure to fix communication cables and power cables to the module by
ducts or clamps.
Failure to do so may cause damage of the module or the cables due to
accidental pull or unintentional shifting of the cable, or malfunctions due to
poor contact of the cables.
z
Connect the connectors to the module securely.
z
Tighten the terminal screws with the specified torque.
If the terminal screws are loose, it could result in short circuits, fire, or
erroneous operation.
Tightening the terminal screws too far may cause damages to the screws
and/or the module, resulting in fallout, short circuits, or malfunction.
z
Do not hold the communication cable by hand when pulling it out from the
module.
Be sure to hold the connector by hand, when removing the cable with a
connector from the module.
Failure to do so may cause malfunctions or damage to the module or cable.
z
Be sure there are no foreign substances such as sawdust or wiring debris
inside the module. Such debris could cause fires, damage, or erroneous
operation.
z
The module has an ingress prevention label on its top to prevent foreign
matter, such as wire offcuts, from entering the module during wiring.
Do not peel this label during wiring.
Before starting system operation, be sure to peel this label because of heat
dissipation.
[Disposal Precautions]
CAUTION
z
When disposing of this product, treat it as industrial waste.
When disposing of batteries, separate them from other wastes according to
the local regulations. (For details of the battery directive in EU member
states, refer to the Web Server Module User's Manual.)
[Transportation Precautions]
CAUTION
z
When transporting lithium batteries, make sure to treat them based on the
transport regulations. (Refer to Chapter 8 for details of the controlled
models.)
