Mitsubishi QJ71WS96 Series, User Manual

Page: 12 / 20

5
Name Description
1) LED Display Refer (1) LED display.
2)
10BASE-T/
100BASE-TX interface
connector (RJ45)
Used for connecting Web server module to
10BASE-T/100BASE-TX.
(Web server module recognizes 10BASE-T/
100BASE-TX according to the external device.)
3)
RS-232 interface
connector Used for connecting Web server module to
RS-232.
4) EJECT button
Used for ejecting a CompactFlash card from
Web server module.
5)
CompactFlash card
mounting slot Slot for mounting a CompactFlash card onto
Web server module.
6)
CompactFlash card
mounting slot cover
Cover for CompactFlash card mounting slot.
7) Battery Battery for file protection.
8) Battery connector pin
Connector pin for battery lead.
(The battery lead is not connected to the
connector at shipment to prevent battery
consumption.)
9) Serial number plate
Indicates the serial number of the Web server
module.
(1) LED display
LED name LED status Description
ON
Normally operating
(It may take some time until RUN LED turns ON
after the module is started.)
RUN
OFF
Watch dog timer error occurrence
(Hardware error)
OFF Normal operation
ON Module continue error
ERR.
Flickering Module stop error
ON CH2 side: data receiving or data sending
CH2 SD/RD
OFF Data not transmitted
ON 100Mbps
100M
OFF 10Mbps
ON
CH1 side: data receiving or data sending
SD/RD
OFF Data not transmitted