2 - 14 2 - 14
MELSEC-Q
2 USING THE E-MAIL FUNCTION
(3) Send mail address setting
[Purpose of setting]
Register the e-mail address of the external devices where e-mail is to be sent.
[Start procedure]
[E-mail setting]
→
Send e-mail address setting
[Setting screen]
[Setting item]
Item name
Description of setting
Setting range/Selections
Send mail address
Set the mail address of the transmission destination
—
Notification setting
Select whether or not to set news
• Execute news
• No execute
(a) Send mail address
1) Designate the mail addresses of a maximum of 16 external devices to
which mails are sent from the local station's Ethernet module.
(Only
one e-mail address can be specified for each area.)
2) In the send e-mail address setting, sequentially set up e-mail
addresses starting from No. 1.
To delete an e-mail address with a mid-setting number, specify dummy
e-mail addresses before that address. (If it is preceded by any empty
e-mail address areas, subsequent setting numbers and areas will
move forward to fill in any empty numbers and areas after each
setting, so the setting numbers will change.)
3) When sending (MSEND instruction) e-mail by the PLC CPU, specify
these setting numbers (1 through 16) in the control data.
(b) Notification setting (News designation)
Designate whether or not to send the news information set with the CPU
monitoring function.
Item
Explanation
Execute news
Notification setting
No execute
For more details on the notification settings, see Section 2.9.
