- 38 -
PEH-MYB
(7, 8MYB only)
–
–
–
–
Mode
Power failure auto-
matic recovery
Indoor temperature
detecting
LOSSNAY connec-
tivity
Power voltage
Settings
Not available
Available
Indoor unit operating average
Set by indoor unit’s remote controller
Remote controller’s internal sensor
Not Supported
Supported (indoor unit is not equipped with outdoor-air intake)
Supported (indoor unit is equipped with outdoor-air intake)
240 V
220 V, 230 V
Mode no.
Setting no.
Check
Remarks
1
01
2
Approx. 4-minute wait-period after
power is restored.
1
02
2
3
1
03
2
3
04
1
2
Other function selections
Now that you know how to change the power voltage setting, there are several other settings that can be changed as well. The following Table lists the various settings that
can be changed through the remote controller and the default settings of the various units.
Table 1
Things to remember when entering function selections:
The basic procedure for entering function selections is the same as described for switching between power voltages. However, there are some differences at step
3
for
selecting the unit number, step
5
for selecting the mode number and step
6
for selecting the unit number. The following Tables 2 and 3 list the various function settings, mode
numbers and setting numbers. Table 2 details the functions of the entire refrigerant system while Table 3 shows the functions that can be set for the indoor unit.
Table 2. Itemized functions of the entire refrigerant system (select unit number 00)
Settings
Not available
Available
Indoor unit operating average
Set by indoor unit’s remote controller
Remote controller’s internal sensor
Not supported
Supported (indoor unit is not equipped with outdoor-air intake)
Not supported (indoor unit is equipped with outdoor-air intake)
240 V
220 V, 230 V
100 Hr
2500 Hr
No filter sign indicator
Quiet
Standard
High ceiling
4 directions
Not supported
Supported
No vanes
Equipped with vanes
Function
Power failure automatic recovery
Indoor temperature detecting
LOSSNAY connectivity
Power voltage
Filter sign
Fan speed
No. of air outlets
Installed options (high-performance filter)
Up/down vane setting
Table 3. Itemized functions of the indoor unit (select unit numbers 01 to 03 or AL)
Mode
Filter sign
Fan speed
No. of air outlets
Installed options (high-
performance filter)
Up/down vane setting
Settings
100 Hr
2500 Hr
No filter sign indicator
Quiet
Standard
High ceiling
Standard
High ceiling
Not supported
Supported
No vanes
Equipped with vanes
Mode no.
Setting no.
Check
Remarks
1
07
2
3
1
08
2
3
09
1
2
10
1
2
11
1
2
3
Setting the unit numbers
Set “00” as the unit number when setting functions from Table 2.
When setting functions from Table 3:
- When setting functions for an indoor unit in an independent system, set the unit number to 01.
- When setting functions for a simultaneous-Twin Triple indoor unit system, assign unit numbers from 01 to 03 to each indoor unit.
- When setting the same functions for an entire simultaneous Twin Triple-indoor unit system, assign “AL” as the unit number.
5
Selecting the mode number
Select from Table 2 and Table 3.
6
Selecting the setting number
Select from Table 2 and Table 3.
Summary of Contents for PEH series
Page 2: ......
