![background image](http://html.mh-extra.com/html/mitsubishi/mj-ez6cx-s1-it/mj-ez6cx-s1-it_service-manual_1809048037.webp)
Power control board holder setscrew
Fitting (2)
Fitting (3)
Power control board holder
Power control board holder (top)
Power control board
Louvre
Power control board setscrew
Power control
board (P1)
Plug cord holder
Plug cord holder
Plug cord holder
Plug cord
Fitting (2)
④
⑤
①
②
③
③
③
⑤
⑥
⑦
Fitting (2)
Fitting
Plug cord holder
Plug cord holder
Fitting
①
Remove the power control board holder (top), and then
remove the connector P1 from the power control board.
→
(Reference : Removing and replacing the power
control board)
②
Detach the fitting which fixes the plug cord holder from
the lower part of the right case as the arrows indicate
in the picture to remove the plug cord holder.
③
Detach the fitting (4) of the plug cord holder to remove
the plug cord.
→
(Removing and replacing the plug cord)
< Point at reassembly >
The plug cord should be attached to the plug cord
holder as shown in the Pic.
Ԛ
.
①
Pull out the water tank.
→
(Reference : Removing the water tank)
②
Remove the left case.
→
(Reference : Removing the left case)
③
Remove the operation control board.
→
(Reference : Removing and replacing the operation control
board)
④
Remove the power control board holder setscrew (1) from the
inside of the louvre of the right case.
⑤
Detach the fitting (5) of the power control board holder to
remove the power control board holder (top).
⑥
Remove the power control board setscrew (1).
⑦
Remove all the connectors of the power control board to
remove the power control board.
→
(Removing and replacing the power control board)
(6) Removing and replacing the plug cord
(5) Removing and replacing the power control board
37
Summary of Contents for MJ-EZ6CX-S1-IT
Page 50: ...Issued in 2010 7 ...