CHASSIS ELECTRICAL –
Battery
54-4
CHARGING
1.
When charging a battery while still installed in the vehicle,
disconnect the battery cables to prevent damage to
electrical parts.
2.
The current normally used for charging a battery should
be approximately 1/10th of the battery capacity.
3.
When performing a quick-charging due to lack of time,
etc., the charging current should never exceed the battery
capacity as indicated in amperes.
4.
Determining if charging is completed.
(1) If the specific gravity of the battery fluid reaches
1.250 – 1.290 and remains constant for at least one
hour.
(2) If the voltage of each cell reaches 2.5– 2.8 V and
remains constant for at least one hour.
Caution
1.
Be careful since the battery fluid level may rise
during charging.
2.
Keep all sources of fire away while charging
because there is a danger of explosion.
3.
Be careful not to do anything that could generate
sparks while charging.
4.
When charging is completed, replace the battery
caps, pour clean water over the battery to remove
any sulfuric acid and dry.