SRS –
Air Bag Modules and Clock Spring
52B-28
A
B
"
STEERING WHEEL REMOVAL
A
C
"
CLOCK SPRING REMOVAL
Caution
The removed clock spring should be stored in a clean,
dry place.
A
D
"
AIR BAG MODULE REMOVAL
(FRONT PASSENGER’S SIDE)
Caution
The removed air bag module should be stored in a clean,
dry place with the pad cover face up.
INSTALLATION SERVICE POINTS
"
A
A
PRE-INSTALLATION INSPECTION
1.
When installing the new air bag modules and clock spring,
refer to “INSPECTION”.
Caution
Dispose of air bag modules only according to the
specified procedure. (Refer to P.52B-32.)
2.
Connect the battery (–) terminal.
3.
Connect the MUT-
II
to the diagnosis connector.
Caution
Make certain that the ignition switch is LOCK (OFF)
when the MUT-
II
is connected or disconnected.
4.
Turn the ignition key to the “ON” position.
5.
Conduct self-diagnosis using the MUT-
II
to ensure entire
SRS operates properly, except open circuit of air bag
modules.
6.
Turn the ignition key to the LOCK (OFF) position,
disconnect the negative battery cable and tape the
terminal.
Caution
Wait at least 60 seconds after disconnecting the
battery cable before doing any further work.
(Refer to P.52B-3.)
MB990803