6
CONNECTING WITH OTHER EQUIPMENT
AUDIO
OUT
MIC IN
VIDEO
OUT
VIDEO IN
AUDIO IN
MONITOR
SET IN
SENSOR
VIDEO
OUT
CCTV
CAMERA
VIDEO
IN
MIC
VIDEO
OUT
IN
IN
OUT
ÉMIC
AUDIO
RESET
REMOTE
SET
RST
IN
REC
GND ALM MODE
CLK CALL
OUT
VERTICAL ADJUSTMENT (Correcting picture vibration at the top and bottom)
The picture vibration can be reduced or eliminated by the following steps.
1
If the vibration occurs in still, slow motion, fast playback (x2) or normal playback in 72H or 96H mode, playback a tape
which is recorded in 3H or 6H mode with this VCR and press the PAUSE button.
If the vibration occurs during normal playback in L18H mode, playback a tape in each playback mode.
2
Press the VERTICAL ADJUST (+) or (-) button to reduce or eliminate the picture vibration.
MONITOR TO BE CONNECTED
•
Connection with a CCTV monitor (for surveillance) is recommended.
•
Connecting with some monitors may cause picture vibration and/or picture distortion at the top or bottom of the
image during still or normal playback.
A domestic television monitor may unable to provide a stable picture without vibration and distortion.
Summary of Contents for HS-7496E
Page 32: ...872C190D8 PRINTED IN JAPAN ...
