Mitsubishi HS-7496E, Installation And Operation Manual

Page: 26 / 32

25
PICTURE
SOFT SHARP
SOFT SHARP
ADJUSTMENT DURING PLAYBACK
If noise appears in the picture during playback, fast playback, reverse playback or forward/reverse slow playback, adjust
the TRACKING buttons to achieve the best picture.
If noise appears.
TRACKING
POSITION/
VERTICAL
ADJUST
TRACKING
POSITION/
VERTICAL
ADJUST
TRACKING ADJUSTMENT
VERTICAL ADJUSTMENT (correcting picture vibration at the top and bottom)
The picture vibration can be reduced or eliminated by the following steps.
1
If the vibration occurs in still, slow motion, fast playback (x2) or normal playback in 72H or 96H mode, playback a tape
which is recorded in 3H or 6H mode with this VCR and press the PAUSE button.
If the vibration occurs during normal playback in L18H mode, playback a tape in each playback mode.
2
Press the VERTICAL ADJUST (+) or (-) button to reduce or eliminate the picture vibration.
N
• Horizontal vibration cannot be corrected with the VERTICAL ADJUST buttons.
• When the VERTICAL ADJUST (+) and (-) buttons are pressed at the same time during still playback, the VERTICAL
ADJUST is set to initial setting.
When the picture is
vibrating
TRACKING
POSITION/
VERTICAL
ADJUST
TRACKING
POSITION
VRTTICAL
ADJUST
N
• This control is only effective during playback.
PICTURE QUALITY ADJUSTMENT
For tracking adjustment at fast playback, reverse playback or forward/reverse slow playback mode, press the PAUSE/
SHUTTLE HOLD button while turning and holding the SHUTTLE ring.
When pressing the TRACKING (+) and (-) buttons at the same time during playback, reverse playback or forward/reverse
slow playback, the tracking is set to the initial setting.
N
• When in reverse playback or reverse slow mode, noise bars may appear on the screen.
• Noise bars will move continuously through the picture when a TRACKING button is pressed and held (except in
L18H playback mode).
• Noise bars will move through the picture each time the TRACKING button is pressed (in L18H playback mode).
This control allows you to adjust the playback picture so that the outline is sharper or softer.