30
Tape Format:
VHS 1/2" width high-density video cassette tape.
Power Source:
AC100-230V (HS-7496E(B), HS-7496EM(B)), AC100-240V (HS-7496E(A)), 50/60Hz
Power Consumption:
Approx. 20 watts.
Television System:
625 lines, 50 field PAL-type colour system.
Video Recording System:
2 rotary heads, azimuth helical scanning system.
Luminance Signal:
Frequency modulation recording.
Colour Signal:
Low frequency conversion, sub-carrier phase shift recording.
Audio Track:
1 track.
Tape Speed and Recording Time
(with E-180 cassette):
Mode
Time
Speed
Recording interval
Video signal
Audio signal
Tape drive
3H
3hrs
23.39mm/sec
20.00msec./Field
Continuous
Recordable
Continuous
6H
6hrs
11.70mm/sec
20.00msec./Field
Continuous
Recordable
Continuous
L18H
18hrs
3.90mm/sec
60.00msec./Field
Time lapse
Recordable
Time lapse
72H
78hrs
–
260.00msec./Field
Time lapse
Not recorded
Time lapse
96H
102hrs –
340.00msec./Field
Time lapse
Not recorded
Time lapse
Fast Forward/Rewind Time:
Approx. 140 sec. with E-180 cassette.
Video Heads:
4 rotary single crystal heads.
Audio/Control:
1 stationary head.
Erase:
1 full-track head.
Motors:
3 motors-drum/capstan direct drive system.
Video Input:
1.0Vp-p, 75ohms BNC plug.
Audio Input:
-8dBs, 50kohms, RCA plug.
Microphone Input:
-67dBs, 600ohms, mini mic jack.
Video Output:
1.0Vp-p, 75ohms, BNC plug.
Audio Output:
-6dBs, 1kohms, RCA plug.
Horizontal Resolution:
More than 330 lines (Black & White)
More than 240 lines (Colour)
Audio Frequency Response:
70Hz- 7kHz (3H mode).
Signal-to-Noise Ratio:
Video: better than 42dB.
Audio: better than 43dB.
Operating Temperature:
41°F-104°F (5°C to 40°C).
Relative Humidity:
Max. 80(%)
Dimensions:
16.7(W)x12.4(D)x3.7(H)(in.).
(Jog dial included)
425(W)x315(D)x93(H)(mm).
Weight:
10 lbs (4.5kg)
Alarm Recording Time:
Timed: 15 sec/30 sec/45 sec/1 min./2 min./5 min./10 min.
Manual 1: Until the alarm reset switch is switched on. Manual 2: Until the alarm set switch is switched off.
Display Format:
DISPLAY MODE 1:
(Day)-(Month)-(Year) (Hour) : (Minute) : (Second) (Alarm recording no.)
DISPLAY MODE 2:
(Day)-(Month)-(Year) (Day of week) (Alarm recording no.),
(Hour) : (Minute) : (Second) ( Recording mode)
Display Position:
In any position
Timer Programme:
8 programmes- Daily start and stop time for one week.
Memory Backup:
Lasts 31days.
Elapsed Time Indicator
The maximum of 89,999 hours.
CONNECTORS
SET Input:
Screw terminal for starting alarm recording.
RST Input:
Screw terminal for finishing alarm recording or for adjusting on-screen clock.
REC Input:
Screw terminal for starting/finishing recording or for series recording or for synchronous recording.
GND:
Screw terminal for ground.
ALM Output:
Screw terminal for output while alarm recording is under way.
CLK Output:
Screw terminal to command camera switching.
MODE Output:
Screw terminal for indication of VCR selected mode.
CALL Output:
Screw terminal for external warning device or for series recording.
REMOTE Jack
Jack for connecting the remote control unit.
Rating:
ALM/CALL/MODE
Active: “Low” Level, max. Current 50mA (+5VDC)/10mA (+24VDC).
Non active: Open, max. V24V DC.
SET/RST/REC
Active: When terminals are short-circuited or “Low” level voltage applied.
Non active: Open, max. V17V DC.
CLK
Recording: A pulse of the frequency division ratio selected by REAR TERMINAL menu.
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
SPECIFICATIONS
Summary of Contents for HS-7496E
Page 32: ...872C190D8 PRINTED IN JAPAN ...