Mitsubishi GOT 1000 GT16, User Manual

Page: 141 / 218

8.3 Option
8 - 19
1
OV
E
R
VI
EW
2
SYSTE
M
CO
N
F
IG
UR
A
T
IO
N
3
S
P
E
CI
F
ICA
T
ION
S
4
P
A
R
T
NA
ME
AND
SETTING
S
5
EMC AND
LO
W
VO
LT
AG
E
DIRE
C
T
IVE
6
IN
ST
AL
L
A
TI
ON
7
WIRING
8
OP
TI
ON

USB environmental protection cover
The USB environment cover protects the USB interface on the front face of GOT from dust, water, and oil.
*1
The GOT is installed with the USB environment cover at factory shipment.
Replace when damage and deterioration are caused.
*1 Note that this does not guarantee all users' operation environment.
In addition, the GOT may not be available for use in the environment where oil or chemicals are splashed over for a long period or
where oil mist is filled.
1.
Get up the hinge of the USB environmental protection cover.
2.
Put the provided fixing screw through the hinge hole, and then fit the screw in
the cover installation hole on the GOT.
3.
Tighten the screw with a torque of 0.36 to 0.48N•m.
Fitting the hinge projections in the GOT guiding holes makes the cover
installation work easier.
4.
When the USB interface is not used, fix the cover by pushing the mark on
the latch firmly.
5.
When the USB interface is used, unfix the latch to open the cover, and then
connect the USB cable.
POINT POINT POINT
Precautions for use USB environment cover
When the USB environmental protection cover is closed, the USB interface complies with the protective structure
IP67.
In this case, the USB environmental protection cover must be fixed by pushing the
mark on the latch firmly.
Environmental protective structure of USB interface is "IP2X" when the USB environmental cover is opened.
Fixing screw