Mitsubishi FREQROL-E700, Manual

Page: 59 / 108

4-13
4
4.2.6 Inverter selection
Click [Register System Setting] to register the system setting, and then parameter setting becomes available.
Choose an inverter (station number) for parameter setting, and click [Next]. After parameter setting is finished,
the window returns to "Inverter Selection" again. To configure parameters on multiple devices, return to this
screen and select another inverter (station number) after you have finished configuring parameters on a
particular inverter.
Click [Finish] to close Easy Setup, and proceeds to the Main frame window.
A
B
E D F G C
No. Name Function and description
A Register System Setting Register the system setting configured in Easy Setup.
B Inverter selecting field
Shows the inverter reflected into the system setting. Choose a station number for
parameter setting, and click [Next].
A check mark is displayed on the station number if the parameter setting has been
already configured. (Click [Register System Setting] to register the system setting first,
and the field becomes available.)
C Finish Click to close Easy Setup, and proceeds to the Main frame window.
D Next> Proceeds to "Control Method".
E <Back Returns to "Model Setting", "Automatic Detection", or "Parameter List".
F Cancel Disables the settings and closes Easy Setup.
G Help Displays Help window.