Mitsubishi FREQROL-E700 Manual Download Page 21

2-3

2

Three-phase 400V class

Three-phase 200V class

0.75kW to 55kW
0.75kW to 55kW

Three-phase 400V class

Three-phase 200V class

0.4K to 15K
0.4K to 15K

FR-F700PJ

Three-phase 400V class

Three-phase 200V class 0.75K 

to 

110K

0.75K 

to 

560K

FR-F800

Service life of parts is extended. It comes with the service life diagnose function as standard.

Compatible with various plug-in options.

   Compatible with networks, such as LONWORKS and CC-Link, via plug-in options.

For fans and pumps

Spring clamp terminals provide high reliability and easy wiring.

Drives both the general-purpose motors and IPM motors. When it drives an IPM motor 

(MM-EFS), which has permanent magnets embedded in its rotor, the energy saving and 

high efficiency can be further achieved.

Drives both the general-purpose motors and IPM motors. When it drives an IPM motor 

(MM-EFS), which has permanent magnets embedded in its rotor, energy savings and high 

efficiency can be further achieved.

SF-PR

This model achieves the IE3 efficiency class with the same dimensions as those of 

conventional models using our unique steel plate frame technology and new core materials.

It maintains interchangeability with our standard-efficiency motor SF-JR for easy 

replacement.

Three-phase 400V class

Three-phase 200V class

0.75kW to 55kW (75kW is to be released soon.)
0.75kW to 55kW (75kW to 160kW are to be released soon.)

MM-EFS (75kW or less)

MM-THE4 (75kW or more)

This is an IPM motor, which has permanent magnets embedded in its rotor. It is more 

efficient than an induction motor.

Compared with the "MM-EF series", the motor loss (iron loss and primary copper loss) is 

further reduced, and thus achieving higher efficiency. This motor satisfies the highest 

efficiency standard IE4 (super premium efficiency).

This inverter is suitable for fans and pumps, and has the various functions: optimum 

excitation control, variable torque acceleration/deceleration patterns, PID control, 

commercial power supply switching, adjustable 5 points V/F, continuous operation at an 

instantaneous power failure, regeneration avoidance function, etc.

Summary of Contents for FREQROL-E700













































































































Reviews: