Mitsubishi ECLIPSE 2011 User Manual Download Page 426

Page: 426 / 494

Vehicle care and maintenance

7-35

3.8 liter models

Check the tension of the drive belt. The deflection must be
within specifications, when pressed at a point halfway between

the pulleys as shown in the illustration with a force of about 22
pounds (100N).
Check the drive belt for cuts and cracks, and replace it if it is

damaged.
When replacing the belt with a new belt, make sure that there is
no interference between the belt and other engine components.

Then, check the tension of the belt at the designated point. The
deflection must be within the specifications.

Amount of belt deflection

1- Power steering pump pulley
2- Crank shaft pulley
3- Generator pulley
4- Air conditioning pulley

3.8 liter

Standard value

Used belt

New belt

.48 to .64 inch

(12.3 to 16.2 mm)

.52 to .59 inch

(13.2 to 15.1 mm)

.38 to .48 inch

(9.6 to 12.3 mm)

.33 to .42 inch

(8.4 to 10.7 mm)

.35 to .40 inch

(8.9 to 10.1 mm)

.24 to .30 inch

(6.2 to 7.5 mm)

WARNING

●

Do not check or touch the drive belt with the engine
running, or serious injury or death may result.

BK0115900US.book 35

ページ

２００９年１０月２７日　火曜日　午後１２時１分

Summary of Contents for ECLIPSE 2011















































































































































































































































































































































































































































































































Search results

Summary of Contents for ECLIPSE 2011

Reviews:

Related manuals for ECLIPSE 2011

Brands by name

Popular brands

Mitsubishi ECLIPSE 2011, User Manual

Search results

Summary of Contents for ECLIPSE 2011

Reviews:

Related manuals for ECLIPSE 2011

Brands by name

Popular brands