Mitsubishi ECLIPSE 2011 User Manual Download Page 55

Page: 55 / 494

2-20

Seat and restraint systems

Seat belt guide (ECLIPSE SPYDER only, front

seats)

N00419300045

Each front seat is fitted with a seat belt guide (A).

Instruction

Insert the seat belt into the seat belt guide through the slot (B).

WARNING

●

Always adjust the shoulder belt anchor so that the

shoulder belt is positioned across the center of your

shoulder without touching your neck. The shoulder

belt should not be able to fall off your shoulder. Fail-

ure to follow this instruction can adversely affect

seat belt performance and increase the risk of seri-

ous injury or death in the event of an accident.

●

Adjust the shoulder belt anchor only when the vehi-

cle is not in motion.

●

Make sure the anchor is securely locked in position

after adjusting it.

WARNING

●

Always use the seat belt guide so that the shoulder

belt is positioned across the center of your shoulder

without touching your neck. The shoulder belt

should not be able to fall off your shoulder. Failure

to follow this instruction can adversely affect seat

belt performance and increase the risk of serious

injury or death in the event of an accident.

BK0115900US.book 20

ページ

２００９年１０月２７日　火曜日　午後１２時１分

Summary of Contents for ECLIPSE 2011















































































































































































































































































































































































































































































































Search results

Summary of Contents for ECLIPSE 2011

Reviews:

Related manuals for ECLIPSE 2011

Brands by name

Popular brands

Mitsubishi ECLIPSE 2011, User Manual

Search results

Summary of Contents for ECLIPSE 2011

Reviews:

Related manuals for ECLIPSE 2011

Brands by name

Popular brands