85/100
The DataManager screen is displayed and at the same time residing in the task tray starts.
Even if the DataManager screen is closed with the x button in this state, residing in the task tray
is not released.
This panel serves to segmentalize the contents notified from the recorder and
acknowledgment to users (Display on the PC screen and alarm sound).
Among the received AlarmNotify information, only the information checked in the left check
boxes are indicated on the event list and are informed to the PC users on the screen (refer to the
following section).
Colors of the right lamps serve to identify each event content in the event list. The color to be
applied to each event can be changed by clicking.
The alarm sound produced at the time of receiving is selected from the dropdown list at the
right end. When you want only the screen display, select “----“.
The port number at the bottom end is set to receive AlarmNotify information. Use the default
if no inconvenience exists. To change this setting, you need to also change setting of the
AlarmNotify issuing port (refer to the previous section).
