60/100
4.9. Grouping
After setting each camera image in the desired position, you can register its screen layout as
“Grouping”. This Grouping registration can facilitate calling the screen layout and displaying it
when the startup operation is carried out next time. The patrol function is also available, in
which the screen layouts in Grouping are patrolled automatically (refer to Sec. 4.9.3).
Information stored as “Grouping” includes the camera layout, login user for a corresponding
recorder, and its password. Therefore, registration information of this Grouping is stored for
each individual user of the DX-PC200. (Even if you use the same PC, you can not use other
user’s Grouping with the other DX-PC200 user.)
In addition, the registered Grouping can be allocated to the user Grouping button in the right
section on the SingleView/MultiView screens.
4.9.1 Registration to Grouping list
With a click on the Grouping Setting Display button of the SingleView/MultiView
screens, “Grouping list” is displayed.
Addition or deletion is carried out with the Addition button or the Deletion button which are
located in the right section of this panel.
With a click on the Addition button, display a dialog to enter the Grouping name. Register it
using an appropriate name. The current screen layout is added to the Grouping list.
<Grouping at startup>
When a check mark is entered into the “Grouping at startup” column of the list, this Grouping is
automatically called and displayed at the time of startup.
