55
8. Printing procedures (Special prints)
Selecting the size
1
Press the DOWN
shift button to select " IMAGES : CARD / 3*4/ 5*5 / 3*3.5 " menu.
2
Press the RIGHT
shift button to select " CARD " , " 3*4 " , " 5*5 " or " 3*3.5 ".
Displaying the image from input signal (source image) or the memorized image
1
Press the SET
SET
button.
• " CHANGE : OK/CANCEL " is selected.
• When changing the PHOTO print setting, select "CANCEL" and press the SET
SET
button.
2
Press the SET
SET
button.
• The MAIN MENU is displayed.
3
Press the SET
SET
button.
• "SAVE 1/2/3" is selected.
• This menu is used to store the setting in any one of 3 programs (1, 2 or 3).
4
Press the RIGHT
or LEFT
shift button to select the program number 1, 2 or 3 to store the setting.
• The setting will be overlaid. When keeping the stored program, do not select the program No. in which the setting is
stored.
5
Press the SET
SET
button.
• The source image (image from the input signal) or memorized image is displayed.
Storing images in memory
1
Press the DISPLAY button to display the set conditions.
2
Press the FIELD/FRAME button on the remote control to select FIELD or FRAME.
3
Press the MONITOR button and select the through image ("LIVE" is displayed on the monitor.) to display the image to be
stored in memory.
• In FIELD mode, press the MEMORY PAGE button to select the memory page to store the image.
The image will be stored in the memory page with [ ] mark. (when PAGE INC is set to ON)
4
Press the MEMORY button to store the image in memory to print.
