Mitsubishi AL-10MR-A, Hardware Manual

Page: 15 / 182

α
Simple Application Controller
Hardware Specification 2
9
ENG
2.5 General Specification
Table 2.8:Environmental and Electrical Specifications
Description Specification
Programming Method Function Block
Program Capacity 64 Function Blocks or 1500 bytes
Program Storage Built in EEPROM (no battery backup required) or optional EEPROM cassette
Device Backup 20 Days at 25°C (by capacitor)
RTC Backup 20 Days at 25°C (by capacitor)
RTC Accuracy 5 seconds / day
Operating Temperature 0 - 55 °C
Storage Temperature (-30) - 70 °C
Vibration Resistance - Direct
Mounting
Conforms to IEC 68-2-6; 10-57 Hz: 0.15 mm Constant Amplitude
57-150 Hz: 19.6 m/s
2
Acceleration
Sweep Count for X,Y,Z: 10 times (80 minutes in each direction)
Vibration Resistance - DIN Rail
mounting
Conforms to IEC 68-2-6; 10-57 Hz: 0.075 mm Constant Amplitude
57-150 Hz: 9.8 m/s
2
Acceleration
Sweep Count for X,Y,Z: 10 times (80 minutes in each direction)
Shock Resistance
Conforms to IEC 68-2-27: 147m/s
2
Acceleration, Action Time: 11 ms
3 times in each direction X,Y, and Z
Noise Immunity 1000Vpp, 1 microsecond, 30 - 100 Hz, tested by noise simulator
Humidity 35 - 85% Relative Humidity, no condensation
Dielectric withstand voltage
3750V AC > 1 min per EN60730-1 between the following points:
Power/Input Terminals and Relay Output Terminals
Relay Output Terminal and Relay Output Terminal
All Terminals and the DIN 43880 Control box or equivalent