Mitsubishi MOTORS CARISMA 1996, Service Bulletin

Page: 33 / 232

2
HOW TO USE THIS MANUAL
SCOPE OF MAINTENANCE, REPAIR AND
SERVICING EXPLANATIONS
This manual provides explanations, etc. concerning
procedures for the inspection, maintenance, repair and
servicing of the subject model. Note, however that for
engine and transmission-related component parts, this
manual covers only on-vehicle inspections, adjustments,
and the removal and installation procedures for major
components.
For detailed information concerning the inspection,
checking, adjustment, disassembly and reassembly of
the engine, transmission and major components after
they have been removed from the vehicle, please refer
to the separate manuals covering the engine and the
transmission.
ON-VEHICLE SERVICE
“On-vehicle Service” is procedures for performing
inspections and adjustments of particularly important
locations with regard to the construction and for
maintenance and servicing, but other inspection (for
looseness, play, cracking, damage, etc.) must also be
performed.
INSPECTION
Under this title are presented inspection and checking
procedures to be performed by using special tools and
measuring instruments and by feeling, but, for actual
maintenance and servicing procedures, visual
inspections should always be performed as well.
DEFINITION OF TERMS
STANDARD VALUE
Indicates the value used as the standard for judging the
quality of a part or assembly on inspection or the
value to which the part or assembly is corrected and
adjusted. It is given by tolerance.
LIMIT
Shows the standard for judging the quality of a part or
assembly on inspection and means the maximum or
minimum value within which the part or assembly must
be kept functionally or in strength. It is a value
established outside the range of standard value.
REFERENCE VALUE
Indicates the adjustment value prior to starting the work
(presented in order to facilitate assembly and
adjustment procedures, and so they can be completed
in a shorter time).
CAUTION
Indicates the presentation of information particularly vital
to the worker during the performance of maintenance
and servicing procedures in order to avoid the possibility
of injury to the worker, or damage to component parts,
or a reduction of component or vehicle function or
performance, etc.
INDICATION OF TIGHTENING TORQUE
The tightening torque shown in this manual is a basic
value with a tolerance of + 10% except the following
cases when the upper and lower limits of tightening
torque are given.
(1) The tolerance of the basic value is 10%.
(2) Special bolts or the like are in use.
(3) Special tightening methods are used.
00-2
GENERAL - How to Use This Manual
<Correct>
<Incorrect>
<Incorrect>
±
00100010081
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk