![Mitsubishi Heavy Industries TU85SAE Operation Manual Download Page 62](http://html1.mh-extra.com/html/mitsubishi-heavy-industries/tu85sae/tu85sae_operation-manual_1812155062.webp)
- 57 -
7 Inspection
1
5
2
6
3
7
9
4
8
10
Inspection of engine oil quantity
(Oil level gauge)
Oil level gauge
Oil inlet
Upper limit
Oil filter
CAUTION
Do not perform inspection of the engine oil or refill it
immediately after the engine stopped.
• Since the engine oil becomes very hot, it may cause heat injury.
Do not refill the engine oil excessively.
• Engine may not be stopped due to abnormal combustion of the
oil, or white smoke or oil may come up from the exhaust pipe.
Use the designated engine oil.
• Otherwise, it may cause troubles.
Surely wipe off spilled engine oil during refilling.
• If the oil is heated up, it may cause a fire.
1
Check if the fluid level of engine oil is in the vicinity of the upper limit of
the oil level gauge.
* Tighten the screw of oil level gauge firmly to check.
2
When the quantity of engine oil is not enough, supply the designated
engine oil from the oil inlet to the level not to excess the upper limit.
[
Refer to page 63 for the designated engine oil.]
NOTE
●
If the icon has lighted and
has been displayed in the operation
time/cycles display mode when the refrigeration unit is operating, it is the
time to change engine oil. Contact your nearest dealer and request them to
change the oil and the oil filter. Reset the cumulative time after changing the
engine oil.
(
Refer to pages from 30 to 31.)
Summary of Contents for TU85SAE
Page 77: ......