manualshive.com logo in svg

Mitsubishi Heavy Industries TU85SAE, Operation Manual

Share
Download
Mitsubishi Heavy Industries TU85SAE Operation Manual Download Page 59

- 54 -

7 Inspection

1

5

2

6

3

7

9

4

8

10

Opening the front panel of condensing unit

Front panel of condensing unit, which is opened and closed for inspection, 
can be opened and closed without tool.

1

 

Open the latches provided at both 
sides of front panel.

⇒ 

Locks are released and the front 
panel comes out a little to this side.

2

 

Open the front panel by hand.

3

 

Insert the stay in the mounting hole on 
the back of front panel to fix the panel.

⇒ 

Fixing angle of front panel can 
be selected from 2 steps (90°and 
135°).

Closing the front panel of condensing unit

1

 

Remove the stay and close the front panel.

 

２

 

Push the latches at both sides in and close the front panel.

⇒ 

It is locked.

3

 

Confirm that the front panel is locked completely.

 

NOTE

 

●

Unless the front panel is pushed in firmly, the locks will not catch properly. 
In such occasion, the front panel may be opened during driving. Make 
sure to lock the panel securely.

Latch

Front panel

Front panel

Stay

Summary of Contents for TU85SAE















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands