manualshive.com logo in svg

Mitsubishi Heavy Industries TU85SAE, Operation Manual

Share
Download
Mitsubishi Heavy Industries TU85SAE Operation Manual Download Page 47

- 42 -

5 Operation

1

5

2

6

3

7

9

4

8

10

Manual defrost operation

１

Starting 

1

 

Press the [DEFROST] switch once during the cooling operation.

⇒ 

"Defrost operation icon

 

" lights and the defrost operation starts.

 

NOTE

 

●

The defrost operation may not start when the inside container temperature is high.

Stopping

As the defrost operation stops, the refrigeration unit returns to the cooling 
operation.
If you need to interrupt the defrost operation and return to the cooling 
operation, press the [DEFROST] switch once more.
If the [RUN/STOP] switch is turned "OFF", the defrost operation is interrupted 
and the refrigeration unit stops.

 

NOTE

 

●

Manual defrost operation can be started even during the unit stop by 
thermostat off.

 

●

Manual defrost operation can not be started during the unit operation stop 
or the heating operation.

Summary of Contents for TU85SAE















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands