manualshive.com logo in svg

Mitsubishi Heavy Industries TU85SAE, Operation Manual

Share
Download
Mitsubishi Heavy Industries TU85SAE Operation Manual Download Page 57

- 52 -

7 Inspection

1

5

2

6

3

7

9

4

8

10

Precautions for inspection

Always carry out the following inspections before the operation to prevent 
any damages of the refrigeration unit before happening.

WARNING

Do not perform the inspection in the place where the 
combustible gas leakage may happen. 

•  Otherwise, if the gas might leak out, it stays around the 

refrigeration unit and may catch a fire.

Do not modify or remove the protective device installed 
on the front panel of condensing unit.

•  It may cause injury if the refrigeration unit is operated with the 

front panel of condensing unit opened.

Be sure to perform daily and periodic inspections.

•  Otherwise, it may cause troubles of the refrigeration unit or 

accidents.

The area must be well ventilated when performing the 
inspection indoors.

•  Otherwise, it may cause oxygen deficiency due to the exhaust 

gas.

Summary of Contents for TU85SAE















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands