― 21 ―
―――――――――――
INSPECTION OF RESPECTIVE SECTIONS
―――――――――――
Make sure to inspect these sections before operating the engine.
●
Is not fouled the air cleaner element?
●
When the element is fouled or it is
not impregnated with oil, inspect and
service it in accordance with
“Inspection and servicing before each
operation” on page 28.
Inspection of air cleaner
●
Check the cooling fins, around the
muffler and cooling air inlet for trash
or withered grasses trapped.
●
Remove such if necessary.
Inspection of clogging
●
Check respective sections for loose
or missing screws or nuts.
●
Service them if necessary.
Inspection of screws and nuts
●
Is sufficient quantity of oil reserved?
●
Is not the fuel degenerated?
●
Use the proper fuel referring to the
“Fuel” section.
CAUTION
●
Sufficient care must be taken on the
fire not only when replenishing but
also handling fuel. It could cause fire
or explosion.
●
Securely close the oil tank cap. Fuel
may leak if the cap is tightened aslant.
It will never leak if the cap is tightened
properly.
(Excluding: TL tank cap breather type)
Inspection of fuel
●
Check for cracks on the fuel pipe,
disconnected joints on the caburetor.
CAUTION
Cracks on the pipe or disconnected
joints could cause leakage of fuel and
resulting fire or explosion. If any
abnormal condition has been
discovered on the pipes, replace or
service them adequately.
Inspection of fuel pipes
