― 5 ―
Be sure
to check the following before operating the engine.
• Is there gasoline in the tank?
• Is old gasoline being used?
• Add the correct fuel following the in-
structions on page 4 “FUEL AND
ENGINE OIL”.
• Is the fuel tank cap closed correctly?
WARNING
• Be sufficiently careful
of heat and flame when
handling and adding fuel. Not
doing so could cause a fire or
explosion.
1
Fuel inspection
• Is the air cleaner element dirty or is
the air cleaner oil (oil bath type)
insufficient?
• When the air cleaner element is dirty
or oil in the air cleaner is dirty or
insufficient, check and maintain
according to page 8 “CARE OF THE
ENGINE” and page 10 “INSPEC-
TION AND MAINTENANCE”.
• Are there grass, leaves, or combus-
tible materials around the muffler?
• Are there grass, leaves, or combus-
tible materials around the recoil
starter air intake?
If there is trash, etc., in the vicinity, be
sure to remove it before operating the
engine.
2
Air cleaner inspection
• Is the engine filled with the specified
amount of engine oil? And is the oil dirty?
• If there is not enough oil, if it is dirty,
or it has been used longer than the
specified time, follow the inspection
and maintenance instructions on
page 4 “FUEL AND ENGINE OIL”
and page 8 “CARE OF THE
ENGINE”.
3
Engine oil inspection
5
Component cleaning
inspection
• Are there any fuel or oil leaks?
If any are found have the engine
repaired.
6
Fuel and oil leaks inspection
• Are all the screws tight?
• Be sure to check the screws used to
fasten the muffler. (Do this when the
muffler is cold.)
4
Inspect the tightness of
all fastener screws.
6.0
r
6.0
r
1.0
r
1.0
r
Engine oil quantity
Fuel tank capacity
Model
• Standard fuel tank capacity and oil
quantity for the various models
GT1000
GT1300
PRE-OPERATION ENGINE INSPECTION
KN52045AA.eng 11.2.18 10:39 AM ページ 5
Summary of Contents for GT 1000
Page 30: ... 28 MEMO ...
Page 31: ... 29 MEMO ...
