Mitsubishi Heavy Industries GT 1000, Owner'S Manual, Page: 12 / 32

― 10 ―
INSPECTION AND MAINTENANCE
Adding engine oil
Be sure to check the
amount of oil before
each operation and fill
the reservoir to the
proper level. Change
the oil if it is dirty.
Cleaning and inspecting components
Clean the area around the muffler cover.
(Remove trash, etc.)
Inspect and tighten all nuts and bolts.
(Are the muffler nuts loose?)
Clean around the recoil starter.
(Remove trash, etc.)
Inspect fuel spills and oil leaks.
(Completely wipe away fuel spills.)
Air cleaner inspection and maintenance
• When the element is very dirty or when
the oil has been used up making the
element dry, after clean-ing the element
soak it in engine oil and strongly wring
out the element with one hand.
• When the oil level is low, add oil to
raise it to the correct level. When the
element is very dirty, wash both the oil
pan and the element with kerosene,
soak the element in engine oil, and then
shake it or wring it until it does not
drip.
Oil bath type (optional specification)
Use of heat or flame is absolutely prohibited.
―――――――――――――
Before each operation
――――――――――――――
Element holder
Element
Oil level
Element
Oil pan
Semi-dry type (standard)
KN52045AA.eng 11.2.18 10:39 AM ページ 10