EN-35
INSTALLATION 2 menu
REMOTE 1 MODE
FILTER MENU
INSTALLATION 2
AUTO POWER ON
AUTO POWER OFF
OFF
ON
BLUE
AUTO
5min
IMAGE CAPTURE
SPLASH SCREEN
DVI LONG CABLE
BACK COLOR
1
1
2
2
opt.
ON
ENTER
ENTER
SETUP
ITEM
SETTING
FUNCTION
AUTO POWER ON
ON / OFF
When ON is chosen, the projector is automatically turn on when the power
cord is plugged in the wall outlet. Choose ON when using the projector
mounted on the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
AUTO POWER OFF
OFF / 5-60min
When no video signal is input and no operation is made, the projector
automatically turns off after the selected time period. A dialog is displayed 5
minutes before the projector turns off.
IMAGE CAPTURE
SETUP
Use to capture the screen for the splash screen. (See page 55.)
SPLASH SCREEN
ON / OFF
Choose ON to display the splash screen when the power is turned on.
• The splash screen can be changed. (See page 55.)
BACK COLOR
BLUE / BLACK /
IMAGE
Use to select the background from among BLUE, BLACK and IMAGE, which
will be displayed when there is no signal input from the source. When IMAGE
is selected, the splash screen will be displayed.
DVI LONG CABLE
AUTO
Select this option for normal use.
MANUAL
Use to adjust the amount of transmission signal correction when a long DVI
cable is used.
REMOTE 1 MODE
ENTER
Select when controlling the projector by a control panel connected to the
REMOTE 1 IN terminal. (See page 61.)
PIN 1
GND
Unchangeable. (Fixed.)
PIN 2
POWER / NONE
Select POWER or NONE.
PIN 3
COMPUTER 1
You can assign COMPUTER 1, COMPUTER 2, VIDEO, S-VIDEO, DVI, HDMI,
or NONE to each pin. Though the assignment can be duplicated, the pins
so assigned become invalid and their settings are displayed with asterisks at
both ends (like “*COMPUTER 1*”).
PIN 4
COMPUTER 2
PIN 5
VIDEO
PIN 6
S-VIDEO
PIN 7
DVI
PIN 8
BLANK / NONE
Select BLANK or NONE.
PIN 9
ON/OFF
Unchangeable. (Fixed.)
RESET
OK
Settings are reset to the defaults.
FILTER MENU
ENTER
The ilter menu for the following settings is displayed.
CLEANUP PERIOD
24H / 1 WEEK /
OFF
You can set the ilter cleaning interval. (See page 65.)
MANUAL CLEANUP
OK
Select this option to clean the ilter immediately.
• You can’t set IMAGE CAPTURE and SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu has been set to
SPLASH ID SCREEN to enable the password lock.
• When you set BACK COLOR to IMAGE and display the splash screen (startup screen) for a long time of period, the after-image
may remain on the screen. Consult your dealer in this case.
• Don’t adjust the lens frequently with BACK COLOR set to IMAGE.
• When STANDBY MODE in the INSTALLATION 1 menu is LOW, you cannot select REMOTE 1 MODE.
Menu operation (continued)
