REV 1.0
39
In
pu
t me
mo
ry
s
ett
in
g
3.6.2
Custom setting
The following items can be customized more as necessary even though these adjustments are normally not needed.
•
Set the same values on all monitors in a display wall.
•
The items with
are automatically adjusted optimally at input signal auto-scan. You can adjust them when
an incorrect image is displayed after the auto-scan. (FILM MODE always selects an optimal value regardless of the
auto-scan.)
H. POSITION, V. POSITION
INPUT MEMORY > H. POSITION, V. POSITION
An incorrect image position in a window can be
adjusted with reference to the top left corner of input
images.
•
This adjustment is not needed for digital input
signals from the daisy chain boards. The image
position doesn’t change even if you change the
values.
H. SIZE, V. SIZE
INPUT MEMORY > H. SIZE, V. SIZE
The size of the input signal can be adjusted when the
entire input signal image is not displayed in the
window even after the H. TOTAL and H. / V. POSITION
adjustment.
H. TOTAL
INPUT MEMORY > H. TOTAL
Analog
Total horizontal sampling number in an input signal
can be adjusted. Incorrect H. TOTAL value generates
vertical striped noises or jitter noises on the image. You
can also adjust it when the entire input signal image is
not displayed in the window even after H. POSITION
adjustment.
Display a window full-screen in its native resolution by
DOT BY DOT (page 37) and adjust it so that the vertical
stripe noises will be eliminated. If the horizontal
position shifts by this adjustment, re-tweak the H.
POSITION menu.
CONTRAST
INPUT MEMORY > CONTRAST
It can adjust the contrast on each window. The initial
setting is 100.
•
CONTRAST in system memory (page 35) adjusts the
contrast on “the entire monitor”.
BRIGHTNESS
INPUT MEMORY > BRIGHTNESS
It can adjust the brightness on dark image areas on
each window. The initial setting is 0.
•
BRIGHTNESS in system memory (page 35) adjusts the
brightness on “the entire monitor”.
TOP
INPUT MEMORY
H. POSITION
Horizontal signal position adjustment
V. POSITION
Vertical signal position adjustment
H. SIZE
Horizontal size adjustment
V. SIZE
Vertical size adjustment
H. TOTAL
Analog
Horizontal sampling number adjustment
CONTRAST
Contrast setting
BRIGHTNESS
Brightness setting
DETAIL
ASPECT RATIO
Input signal aspect ratio setting
SIGNAL TYPE
Signal format setting
INTERLACE
Interlace signal conditioning
FIELD JUDGEMENT
Interlace signal field swap judgment
SCALING FILTER
Scaling filter setting
CLAMP START
Analog
Clamp start position setting
CLAMP WIDTH
Analog
Clamp width setting
MASK START
Analog
V. sync mask start position setting
MASK END
Analog
V. sync mask end position setting
FRAME LOCK
External signal sync setting
FILM MODE
Film mode setting
INPUT MEMORY SAVE
Input memory save (page 41)
