OPERATING PROCEDURE
PHOTOS
3. Removing the fan motor
(1) Remove the service panel (Photo 1).
(2) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(3) Remove the top panel, the cabinet, and the back panel
(Photo 1, 2, 3).
(4) Disconnect connectors CN712, CNF1, CNTH1, CNTH2,
CN63H, CN791, CN792, CN793, CN794 (
MXZ-4F72VF
/4F72VF2/4F72VF3/4F80VF2/4F80VF3
), CN797 on the
outdoor control P.C. board and disconnect the relay con-
nector of the compressor lead wire.
(5) Remove the screws of the electrical box assembly, and
remove the electrical box assembly (Photo 4).
(6) Remove the propeller fan.
(7) Remove the fan motor.
Photo 8
4. Removing the compressor and the 4-way valve
(1) Remove the service panel (Photo 1).
(2) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(3) Remove the top panel, the cabinet, and the back panel
(Photo 1, 2, 3).
(4) Recover gas from the refrigerant circuit.
NOTE
: Recover gas from the pipes until the pressure
gauge shows 0 kg/cm
2
(0 MPa).
(5) Disconnect the outdoor control P.C. board connectors:
CN712, CNF1, CNTH1, CNTH2, CN63H, CN791,CN792,
CN793, CN794 (
MXZ-4F72VF/4F72VF2/4F72VF3/4F80V
F2/4F80VF3
), CN797.
(6) Disconnect the compressor lead wire from the terminal of
the compressor (U, V, W).
(7) Remove the screws of the electrical box assembly, and
remove the electrical box assembly (Photo 4).
(8) Remove the propeller fan.
(9) Remove the sound proof felt *1, *2 and *3 (
MXZ-
3F54VF/3F54VF2/3F54VF3
).
NOTE
: Before removing the sound proof felt, remove
the hook-and-loop fastener of the top felt by the
power receiver.
(10) Remove the screws of the separator, and remove the
separator.
(11) Detach the brazed parts of the compressor suction and
discharge pipes.
(12) Remove the compressor nuts and remove the compres-
sor.
(13) Detach the brazed parts of the 4-way valve and pipe.
Sound
proof
felt *2
R.V. coil
4-way valve
LEV coil R
Expansion valve R
Suction pipe
brazed part
Discharge pipe
brazed part
Compressor nuts
Power receiver
Hook-and-loop
fastener
129
Photo 9
Photo 10
Screws of the outdoor fan motor
Propeller fan
Propeller
fan nut
Separator
Sound
proof felt *1
Sound proof felt *3
(
MXZ-3F54VF/3F54VF2/
3F54VF3
)
OBH790D
Summary of Contents for SEZ-M-DA Series
