Mitsubishi Electric QD77MS, User Manual

Page: 800 / 1052

14 - 4
Chapter 14 Common Functions
14.2 Parameter initialization function
The "parameter initialization function" is used to return the setting data set in the buffer
memory/internal memory and flash ROM/internal memory (nonvolatile) of Simple
Motion module to their factory-set initial values.
The details shown below explain about the "parameter initialization function".
[1] Parameter initialization means
[2] Control details
[3] Precautions during control
[4] Parameter initialization method
[1] Parameter initialization means
• Initialization is executed with a sequence program.
• Initialization is executed by GX Works2.
Refer to the "Simple Motion Module Setting Tool Help" of GX Works2 for the
execution method by GX Works2.
[2] Control details
The following table shows the setting data initialized by the "parameter
initialization function".
(The data initialized are "buffer memory/internal memory" and "flash
ROM/internal memory (nonvolatile)" setting data.)
Target area
Parameters
Basic parameters
Detailed parameters
Home position return basic parameters
Home position return detailed parameters
Extended parameters
Servo parameters Servo parameters
([Pr.100], PA, PB, PC, PD, PE, PS, PF, Po, PL)
Mark detection Mark detection setting parameters
Synchronous control
parameters
Servo input axis parameters
Synchronous encoder axis parameters
Synchronous parameters
Positioning data
Positioning data (No.1 to 100)
Positioning data (No.101 to 600)
Block start data Block start data (block No.7000 to 7001)
Condition data (block No.7000 to 7001)
Block start data (block No.7002 to 7004)
Condition data (block No.7002 to 7004)
Cam data