OPERATING PROCEDURE
PHOTOS/FIGURES
1. Removing the panel
(1) Remove the front panel. Remove the horizontal
vanes.
(2) Remove the screw caps of the panel. Remove the
screws of the panel.
(3) Remove the screw of the Wi-Fi cover on the upper
right of the panel, and remove the Wi-Fi cover.
(4) Remove the Wi-Fi interface on the right side of the
panel. Pull out the Wi-Fi cable, and pull out the cable
tie fixed on the panel. (
A
)
(5) Insert Wi-Fi interface into the water cut (
B
) in the
same direction as Photo 1-3, and fix it temporary.
(6) Unhook the lower part (
C
) of the panel.
(7) First, hold the lower part of the right end of the panel,
and hold the lower part of the left end of the panel.
(8) Pull the panel slightly toward you, and then remove
the panel by pushing it upward.
40
11-2. MSZ-FT25VGK MSZ-FT35VGK MSZ-FT50VGK
NOTE:
Turn OFF the power supply before disassembly.
: Indicates the visible parts in the photos/figures.
: Indicates the invisible parts in the photos/figures.
Screws of the panel
Front panel
Horizontal vanes
C
Wi-Fi interface
Wi-Fi interface
Photo 2-2
Photo 2-1
Photo 2-3
A
B
Screw of
Wi-Fi cover
Wi-Fi cover
Photo 1
Screws of the panel
Horizontal vanes
Front panel
OBH864
