OPERATING PROCEDURE
PHOTOS/FIGURES
1. Removing the panel
(1) Remove the front panel. Remove the horizontal vanes.
(2) Remove the screw caps of the panel. Remove the
screws of the panel.
(3) Remove the screw of the Wi-Fi cover on the upper right
of the panel, and remove the Wi-Fi cover.
(4) Unhook the lower part (
A
) of the panel.
(5) First, hold the lower part of the right end of the panel,
and hold the lower part of the left end of the panel.
(6) Pull the panel slightly toward you, and then remove the
panel by pushing it upward.
36
(1) Slide the sleeve and check if there is a locking lever or not.
(2) The terminal with this connector shown
below has the locking mechanism.
Slide the sleeve.
Pull the terminal while
pushing the locking
lever.
Hold the sleeve, and
pull out the terminal
slowly.
Connector
Sleeve
Locking lever
<Detaching method of the terminal with locking mechanism>
The terminal which has the locking mechanism can be detached as shown below.
There are following 2 types of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
DISASSEMBLY INSTRUCTIONS
11
11-1. MSZ-FT25VG MSZ-FT35VG MSZ-FT50VG
NOTE:
Turn OFF the power supply before disassembly.
Photo 1
Photo 2
Screws of the panel
: Indicates the visible parts in the photos/figures.
: Indicates the invisible parts in the photos/figures.
Screws of the panel
Horizontal vanes
Front panel
A
OBH864
