86
WIRELESS REMOTE CONTROLLER
ON/OFF
TOO
COOL
TOO
WARM
LONG
Signal transmitting section
Operation display section
OPERATE /STOP
(ON /OFF)button
TEMPERATURE buttons
Indication of remote controller
model is on back.
ON-TIMER button
CLOCK SET button
TIME SET buttons
FORWARD button
BACKWARD button
VANE CONTROL button
(Horizontal vane button)
OFF-TIMER button
LONG button
RESET button
WIDE VANE button
(Vertical vane button)
FAN SPEED CONTROL button
OPERATION SELECT button
ECONO COOL button
MSZ-GA50VA MUZ-GA50VA
MSZ-GA60VA MUZ-GA60VA
MSZ-GA71VA MUZ-GA71VA
Once the operation mode is set, the same operation mode can be repeated by simply turning OPERATE/STOP
(ON/OFF) button ON.
Indoor unit receives the signal with a beep tone.
When the system turns off, 3-minute time delay will operate to protect system from overload and compressor will not
restart for 3 minutes.
-1.0
:
-0.7
:
1. Thermostat control
Thermostat is ON or OFF by difference between room temperature and set temperature
Initial temperature difference Thermostat
Room temperature minus set temperature : -1.0
:
or more··············································ON
Room temperature minus set temperature : less than -1.0
:
············································OFF
Set temperature
Difference between room
temperature and set temper-
ature during operation.
6-13. COOL (
) OPERATION
(1) Press OPERATE/STOP(ON/OFF) button.
OPERATION INDICATOR lamp of the indoor unit turns on with a beep tone.
(2) Select COOL mode with OPERATION SELECT button.
(3) Press TEMPERATURE buttons (TOO WARM or TOO COOL button)to select the desired temperature.
The setting range is 16 ~ 31°C
OBT06D--3qxp 07.3.2 9:42 AM Page 86
