62
PHOTOS
3. Removing the outdoor fan motor
(1) Remove the cabinet. (Refer to 1)
(2) Disconnect the connector and remove the clamp of fan
motor lead wire.
(3) Remove the propeller fan nut and remove the propeller fan.
(4) Remove screws securing the fan motor.
4. Removing the compressor
(1) Remove the cabinet. (Refer to 1)
(2) Remove the terminal cover on the compressor
(3) Disconnect lead wires from the glass terminal of the com-
pressor.(Refer to 2)
(4) Release gas from the refrigerant circuit.
(5) Disconnect the welded part of the discharge pipe.
(6) Disconnect the welded part of the suction pipe.
(7) Remove nuts securing the compressor.
(8) Remove the compressor.
NOTE
●
Reclaim all refrigerant in an environmentally acceptable man-
ner.
Photo 5
Compressor
fan
Discharge
pipe
Suction
pipe
Compressor nuts
Photo 4
Clamp
Connector
Propeller fan
Propeller fan nut
OPERATING PROCEDURE
Terminal
cover
Set screw for
outdoor fan motor
OB198--2.qxp 24/6/97 6:06 AM Page 62
Summary of Contents for Mr. Slim MSH09NW
Page 2: ......
Page 72: ...72 1 3 8 11 4 2 13 14 6 7 9 10 17 19 20 15 16 5 OUTDOOR UNIT STRUCTURAL PARTS MUH17NN 18 21 ...
Page 75: ......