Mitsubishi Electric MR-B42S, Operating Instructions Manual

Page: 10 / 60

10
Press to
display the compartment
you want to cool fast.
The display will change
at each press.
Press and
hold for 3 seconds.
(Until the buzzer emits
“peep, peep” tone.)
is illuminated.
*1: The temperatures differ from the freezing setting in the versa compartment.
About the temperature control in the versa compartment
*For finer temperature control
*For switching the freezer to the soft freezing
The temperature control in each compartment is as follows.
page
12
page
27
page
26
Compartment
display
Slightly cooler
Much cooler
Standard
Slightly cool
Too cool
T
emperature contr
ol
2 to 3°C
higher than
“M” level
1 to 2°C
higher than
“M” level
Around
0 to 6°C
1 to 2°C
lower than
“M” level
2 to 3°C
lower than
“M” level
2 to 3°C
higher than
“M” level
1 to 2°C
higher than
“M” level
Around
-16 to -22°C
1 to 2°C
lower than
“M” level
2 to 3°C
lower than
“M” level
2 to 3°C
higher than
“M” level
1 to 2°C
higher than
“M” level
Around
3 to 9°C
0 to 1°C
lower than
“M” level
1 to 2°C
lower than
“M” level
Fast cooling
Raise or lower the
temperature in the compartments.
*Display example. *Display example.
s 4HEABOVETEMPERATURESAREGUIDELINES4HETEMPERATURESMAY
differ depending on the use, such as storage of foods and
opening/closing the doors.
s 4HETEMPERATURESINTHECOMPARTMENTSMAYTEMPORARILYRISEOR
drop before or after defrosting.
s The temperatures given above represent the guideline temperatures
measured after reaching stabilization at the lower part of the
refrigerator when the ambient temperature is 30°C and the doors
closed with nothing inside. The temperatures may differ depending
on the use, such as storage of foods and opening/closing the doors.
Use the fast cooling mode when storing a lot of
foods after buying a lot. The refrigerator cools
down the foods quickly to keep them fresh.
s 9OUCANUSEFASTCOOLINGWITHFOODSINSIDE
s 4HETEMPERATUREREACHESTHESETTEMPERATUREAFTER
FASTCOOLING
s $URINGTHEFASTCOOLINGTHENOISEFROMTHEREFRIGERATOR
will become higher due to high speed cooling.
Temperatures in the compartments When to use ?
Press to display the
compartment you want to change
the temperature control mode.
The display will change at each
press.
Press to
change the temperature
control mode.
The display
will change at each press.
is extinguished. Ends automatically in about 2 hours.
&ASTCOOLINGOFVERSACOMPARTMENT
()+!2)SUPERCOOLFREEZING
If you want
to stop before
it ends
Press and is
extinguished.
page
12
page
13
Setting the
Refrigerator, Freezer
and Vegetable Compartment
Raise or lo
wer the temperature in the compar
tments / F
ast cooling
*1