85
(6) The message ”
Settings will be sent. OK?”
will appear, click
[Yes]
.
The setting will be applied to the unit.
(7) The message ”
Settings have been sent.”
will appear, click
[OK]
.
(8) Click
[Close]
to return to the
AI controller (63MC) measurement value monitoring screen
.
3.13.2.3 Monitoring Dip switch setting of AI Controllers
(1) Click
[Option]
in the
AI controller (63MC)
measurement value monitoring screen
and
select
[DIP switch setting monitoring]
in
the sub-menu.
(2) The DIP switch setting
is monitored, and
DIP switch setting monitoring screen
will appear.
* The pressed (sunken) button shows
the current status.
(3) Click
[File output]
to save the monitored information as a CSV file.
Refer to section [3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC) (5)].
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.7.]
(4) Click
[Close]
to return to the
AI controller (63MC) measurement value monitoring screen
.
3.13.2.4 Monitoring of the correction value for Pt100 detection
(1) Click
[Option]
in the
AI controller (63MC) measurement
value monitoring screen
, and select
[Monitoring of the
correction value for Pt100 detection]
in the sub-menu.
NOTE:
When you use Fahrenheit for the unit, there might be differences of the plus or minus 0.1 °F in the set
value and the value monitored after it sets it.
