Mitsubishi Electric melsec q03ud(E)cpu, User Manual

Page: 194 / 220

192
(2) Control data
Device Item Description Setting range
Set by
*1
+0
Instruction
execution
type
[1] Execution type
0:
No arrival confirmation
The instruction completes as soon as it sends data
from the host station's CPU module.
1: With arrival confirmation
The instruction completes after writing the data to the
other station's CPU module.
[2] Error completion type
Specifies whether or not clock data setting is required
upon error completion.
0: Clock data setting is not required.
1: Clock data setting is required.
[3] Arrival monitoring time setting
0: Units of 1 second
1: Units of 100 ms
8000
H
8001
H
8080
H
8081
H
8100
H
8101
H
8180
H
8181
H
User
+1
Completion
status
Stores the status upon the completion of the instruction.
0: Completed normally
Other than 0: Completed with an error (error code)
- System
+2
Channel
used by the
host station
Specifies which channel the host station uses.
(1 to 8 channel) ( Page 184, Section 13.1 (4))
0001
H
to 0008
H
User
+3
Target CPU
module type
Sets 0000
H
or 03FF
H
. (Either setting provides access to
the target CPU module.)
0, 03FF
H
User
+4
IP address
setting
*2
Specifies the IP address of the CPU module of the other
station.
+4: IP address (lower 16 bits)
+5: IP address (upper 16 bits)
1
H
to FFFFFFFE
H
User
+5
+6
- (Fixed value) 0 User
+7
Number of
resends
This setting takes effect when +0 is configured to set
the execution type to "1: With arrival confirmation."
(1) When the instruction is executed
Specifies how many times to resend the data in the
event of failure to complete within the monitoring time
set with +8.
0 to 15 (times)
(2) When the instruction is completed
Stores how many times the data was resent (and the
result thereof).
0 to 15 (times)
0 to 15
User
System
S1
b15 b14 b9 b8 b7 b6 b1 b0 to to
1 0 0 [3] [2] [1]
Execution
source
Target
Completed
Execution
source
Target
Completed
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1