Mitsubishi Electric melsec q03ud(E)cpu, User Manual

Page: 167 / 220

165
CHAPTER 10 REMOTE PASSWORD
10
10.2 R
emote Passwo
rd Setting
10.2
Remote Password Setting
(1) Setting a remote password
Set a remote password and a target connection in the programming tool, and write the data to the CPU module.
Project window [Parameter] [Remote Password]
Item Description Setting range
Password Setting
Enter a remote password to be set for the CPU module.
*1
Up to four
characters
Password
Active
Module
Setting
Model Name
Select a CPU model to enable the remote password for the built-in
Ethernet port of the CPU module.
Only one CPU model is selectable.
Ethernet Built-in
CPU
Condition Click this to display the "Remote Password Detail Setting" window. -
User
Connection
No.
*5
Connection 1 to 16
Select one of them when the remote password is to be enabled for
the built-in Ethernet port.
(Setting of an unused connection or MELSOFT connection is
ignored.)
Select the
checkboxes
appropriate to the
target connection.
System
Connection
*6
MELSOFT Transmission Port (TCP/IP)
*2
Select one of them when the remote password is to be enabled for
the built-in Ethernet port.
MELSOFT Transmission Port (UDP/IP)
*2*3
FTP Transmission Port (TCP/IP)
Direct Connection of MELSOFT
*4
Regard as Error when Remote Password Mismatch Count
Reaches Upper Limit
Select this when enabling this operation.
(Useful for detecting unauthorized access)
( Page 169, Section 10.4)
Upper Limit of Mismatch Specify the maximum number of mismatches. 1 to 65535
Clear Mismatch Count when Remote Password Matches Select the checkbox when this operation is to be performed. -