191
CHAPTER 13 READING/WRITING DEVICE DATA OF ANOTHER STATION CPU BY IP ADDRESS SPECIFICATION
13
13.1 In
structions to Read
/write Device Da
ta of
Another
Station
CPU by IP Address S
p
ecification
13.1.2
Wr
iting device da
ta (SP.WRITE)
13.1.2
Writing device data (SP.WRITE)
*1
Local devices and the file registers set for individual programs cannot be used.
*2
Word devices T, C, D, W, ST, SD, and SW can be specified.
*3
For information on string data specified with
, refer to
(1) Setting data
*4
In the "Set by" column:
"User" means that the data is set before executing the SP.WRITE instruction.
"System" means that the result of executing the SP.WRITE instruction is stored in the CPU module.
When specifying the start device by the device specification method, ensure that the CPU module on another station to
which to write data is within the range of devices available to the CPU module on the host station.
(The start device
of the CPU module on another station to which to write data) + (number of writes - 1)
≤
(the end device number of the CPU module on the host station (the end device number of the CPU module device on the
host station that has the same device name as
))
Setting data
Internal device
R, ZR
Indirect
specification
J
\
U
\G
Zn
Constant
string
Other
Bit
Word
Bit
Word
-
*1
*1
*1
-
-
-
-
*1*2
*1
*1
-
-
-
-
-
*3
-
*1
*1
*1
-
-
-
-
Setting data
Description
Set by
*4
Data type
U0
Dummy
-
String
Start device that contains control data.
User, system
Device name
Start device of the CPU module of the host station that
contains the data to be written.
User
Device name
Start device of the CPU module of the other station where to
write the data.
System
Device name
The host station's CPU module device that will be turned ON
for one scan upon the completion of the instruction.
+1 will also be turned on in the event of error completion.
System
Bit
SP.WRITE
SP.WRITE
U0
S1
Command
S2
D2
D1
or
D1
"
"
S1
S2
D1
D2
S2
S1
S2
D1
D2
D2
S2
S2
Summary of Contents for melsec q03ud(E)cpu
