Mitsubishi Electric melsec q03ud(E)cpu, User Manual

Page: 112 / 220

110
7.4.2
Disconnecting a connection (SP.SOCCLOSE)
*1 File registers set for each local device or program cannot be used.
(1) Setting data
*2 The "Set by" column indicates the following.
User: The data must be set before executing the SP.SOCCLOSE instruction.
System: The CPU module stores the execution result of the SP.SOCCLOSE instruction.
When replacing the ZP.CLOSE instruction (Ethernet module dedicated instruction), dummy argument can be used in a Built-
in Ethernet port QCPU instruction without rewriting.
(2) Control data
*3 The "Set by" column indicates the following.
System: The CPU module stores the execution result of the SP.SOCCLOSE instruction.
Setting
data
Internal device
R, ZR
J  \ 
U  \G  Zn
Constant
K, H
Others
Bit Word Bit Word
- - -
- *1 *1 - - -
*1
(except for
T, ST, and
C)
*1 - - -
Setting data Description
Set by
*2
Data type
U0 Dummy - Character string
Connection number (Setting range: 1 to 16) User BIN 16-bit
Start number of the device from which control data are stored
System
Device name
Start number of the device which turns on for one scan upon
completion of the instruction
+1 also turns on when failed.
Bit
Device Item Description Setting range
Set by
*3
+0
System area - - -
+1
Completion
status
Completion status is stored
0000
H
: Completed
Other than 0000
H
: Failed (Error code)
- System
SP.SOCCLOSE
SP.SOCCLOSE U0 S1 S2 D
Command
S1
S2
D
S1
S2
D
D
S2
S2